Capitol city lumber nc - T1-11 Exterior Siding Panel with 8″ OC. The T1-11 style siding is made from rough texture panels and is 8” OC, on-center. Every 8”, there is a 1/2” channel. This panel is made with Radiata Pine Lumber. Available in 4’x8′ and 4’x9′ sizes in a 5/8″ thickness. This product can now be shipped to all 48 continental States through ...

 
Okoume Marine Plywood. Marine grade unfinished Okoume plywood or Aquatek Meranti Marine plywood. Marine grade plywood has solid plys with no voids and a pholic exterior glue. This plywood is not treated. Full 4×8 sheets are available in stock at our location in 1/2″ and 3/4″. We also have a limited selection of partial redi-cut 2’x4 ... . 400 legend vs 350 legend

Our 2 x 6 Cypress is sold by the linear foot. Kiln-dried and select D grade. There could be an occasional pin knots and other imperfections, but most boards are pretty clear. This material is S4S meaning both sides and edges are planed smooth. Actual board dimension is 1-1/2″ thick by 5-1/2″ wide. Boards are 8′ to 16′ in length.Store Hours. Monday - Friday. 8:00 AM - 4:30 PM. Saturday. 9:00 AM - 2:00 PM. Sunday. Closed. Offering a wide variety of building materials for ceiling panels and tiles, wall and closet paneling & plywood & cedar chip board closet liners.There are 4 different designs to choose from. The Versatex® PVC material the lamp posts are constructed from is ideally suited for exterior application and can weather all seasons. The bottom 16″ of post is designed to be …Our Domestic Hardwoods are S2S, meaning they are skip surfaced on both faces, left rough on the edges. Our Exotic Hardwoods are sold rough, but can be surfaced here at the store for a fee. Most […] More Info. Monday - Friday. 8:00 AM - 4:30 PM. Saturday. 9:00 AM - 2:00 PM. Sunday. Capital City Lumber ; GENERAL MANAGER BRAD WOOLERY. PHONE (850) 201-3412. FAX (850) 422-1043. [email protected] ; ACCOUNTS RECEIVABLE CUSTOMER SERVICE LINDA ...Our 5/4 x 4 Cypress is sold by the linear foot. Kiln-dried and select D grade. There could be an occasional pin knots and other imperfections, but most boards are pretty clear. This material is S1S2E meaning one side is left rough, and the other side and edges are planed smooth. The rough side is […] $ 4.59 $ 3.29.Monday - Friday. 8:00 AM - 4:30 PM. Saturday. 9:00 AM - 2:00 PM. Sunday. Closed. Our selection of cedar lap siding is the best in the Raleigh area. We stock channel, skirl bevel, and bevel lap siding. We also offer local delivery!Lumber; Plywoods; Interior Products; Exterior Products; Hardware; CLEARANCE & SALES; Popular Brands. Randall Manufacturing; View All; Info A Division of Capitol City Lumber …T&G Pickwick Knotty White Pine Paneling. Reversible T&G paneling in Knotty White Pine. Front face has a pickwick pattern and back face has a Vee’d edge. T&G is 3/4″ thick and available in 5-1/8″, 6-7/8″ and 8-7/8″ face widths. Sold by the linear foot. Tier discounts available starting at 150 lft. Hardware designed to help mount square top furniture legs. Measures 2-5/8″ wide by 1-1/2″ tall.Should have consistent thickness within species. Our 8/4 board is typically dressed 1-3/4” to 1-7/8” thick depending on species and sold by the board foot. Should have consistent thickness within species. Cherry Hardwood S2S is stocked in 4/4, 5/4, and 8/4 thicknesses. Skip surfaced on both faces, left rough on the edges, and sold by the ...Nicknamed the “Land of the Sky,” the city of Asheville, N.C., has an average elevation of 2,134 feet above sea level. Just 20 miles northwest of Asheville is Mt. Mitchell, the high...2×12 Rough WR Cedar. This 2×12 Rough WR Cedar is sold by the linear foot. Often used for garden beds, landscape timbers and other rustic outdoor projects, this board is a #2 grade, left wet and rough. Actual board dimension estimates at 1-7/8″ thick by 11-7/8″ wide. Timbers are 8′ to 20′ in length. This stock is sold by the linear foot.This 6×6 Western Red Cedar timbers are sold by the piece. Often used for deck and fence posts, garden beds, landscape timbers, retaining walls and other rustic outdoor projects, this board is a #2 grade, left wet and rough. Actual board dimension is 5-7/8″ thick by 5-7/8″ wide. Timber comes in 8′, 10′ and 12′ lengths. Store Hours. Monday - Friday. 8:00 AM - 4:30 PM. Saturday. 9:00 AM - 2:00 PM. Sunday. Closed. Providing interior and exterior flooring in Raleigh, NC such as vinyl flooring, laminate flooring, wood flooring, floor protection, pine, and PVC. This western red cedar panel measures 4’ by 8’ (48″ x 96″) and 7/8” thick. Each lattice lath measuring 7/16″ thick by 1-3/4″ wide. Lattice allows plenty of sunlight through with 1-3/4″ wide openings. Cedar is naturally resistant to rot, decay, and insects. Ideal for use as an exterior fence, garden divider, or trellis.5/4×4 Clear Yellow Pine Lumber, S4S. Our 5/4×4 clear Yellow Pine lumber is sold by the board in 10′ to 16′ lengths. These boards are often times used for trim, furniture and other inside projects. Boards are a nice clear grade and S4S where both sides and edges are planed smooth. Actual board dimension is a full 1″ thick by 3-1/2″ wide.Our 4/4 board is dressed 13/16” to 7/8” thick and sold by the board foot. We also carry a nice grade of 1/4″ and 3/4″ Spanish Cedar plywood and have a Spanish cedar veneer with a 3M backer. Our S2S Spanish Cedar 1/2" thick is sold by the square foot and our 4/4 thick is sold by the board foot. Skip surfaced on both faces, left rough on the.This paneling is unfinished Cypress in a beautiful select and knotty grade. We stock this unfinished pecky cypress paneling in 1×4 (discontinued, limited stock) and 1×6 in random lengths. Sold by the linear foot in store only. Purchase 3′, 4′, 6′ or 8′ boards with a minimum of 3 at our online store, just click the link below.Landscaping supply in Raleigh, NC including slate, fencing, garden bed corners, lattice, railroad ties, stakes, technisoil and utility poles. Capitol City Lumber Company Products Our on-site woodcutting experts should be able to help you with most lumber, plywood, trim, moldings, paneling, and sidings. We offer 2 courtesy rough cuts per item at the Saw House. Please allow up to a 1/4″ variance on cuts. Additional cuts will be $0.50 per cut. A lead time may be required for additional cuts.Capitol City Lumber Co located at 4216 Beryl Rd, Raleigh, NC 27606 - reviews, ratings, hours, phone number, directions, and more.Dec 20, 2022 · Learn about this type of lumber with Capitol City Raleigh lumber yard! ... - Near NC State Fairgrounds. Phone: 919.832.6492. Toll Free: 800.244.6492. The 1/4” sheet is graded B4. Front face is a B grade that is a smooth sanded and patch-free face with an occasional small blemish. Back side is a 4 grade that will be of same or similar wood but may have filled knots, veneer joints or seams. This plywood is a stain grade on one side only. The 3/4″ sheets are graded B-2. Let them know if there is anything they can do to assist you with your account. Call 888-321-6698. Email [email protected]. Visit www.Smartview.Capitalone.com. Capital One N.A. service hours are: Monday – Friday, 7 a.m. to 8 p.m.; Saturday, 8 a.m. to 5.pm., ET. We offer an extended 45 days term business charge account through ...Tier discount available on all posts and rail orders over 50 pieces, any combination. 2-hole rails are 6′ tall and made from ground contact southern yellow pine. Monday - Friday. Saturday. 9:00 AM - 2:00 PM. Sunday. Closed. Split-rail fencing is a timeless classic fencing. This tapered split rail fencing is made of Treated Yellow Pine and ...Channel Rustic Siding is sold by the linear foot and comes up to 16′ long. Available in 2 different size’s: 1×8 and 1×10. There is an approx. 1″ smooth channel between boards on the rough side when installed. 1X8 Channel Rustic Cedar Lap Siding. actual 3/4” thick by 7-1/8” wide. 6-3/8” exposure width. 1X10 Channel Rustic Cedar Lap ...For your convenience, Capitol City Lumber Company offers delivery of your lumber, hardware, and other building materials. Delivery is $55 per trip within Wake County and $95 per trip in Durham, Chatham, Orange, Lee, Harnett, Johnston, Nash, and Franklin counties. ... - Near NC State Fairgrounds. Phone: 919.832.6492. Toll Free: 800.244.6492 ...Baltic Birch Marine Plywood. Unfinished Baltic Birch marine plywood whole-piece face veneer plywood in thicknesses from 6mm or 1/4″ to 24mm or a full 1″ in six different thicknesses. This plywood is graded BB/CP and has ALL BIRCH solid inner plies with no voids for durability and strength. It is constructed with exterior pholic resin glue.Our 2×6 Doug Fir is sold by the board. Kiln-dried and clear grade with just an occasional pin knot. This material is S4S where both sides and edges are planed smooth. Boards come in lengths 8′ through 20′ lengths. Actual board dimension is 1-1/2″ thick by 5-1/2″ wide. Quantity discount tier pricing is available on all orders over 50 ...4×10 Doug Fir S4S timber sold by the board. These boards are often used for rustic fireplace mantels and mantel brackets. Left wet and construction grade. This material is S4S meaning all four sides are planed smooth. Boards come in 6′, 8′ and 12′ lengths. Actual board dimension is 3-1/2″ thick by 9-1/4″ wide.Reversible T&G paneling in Knotty White Pine. Front face has a pickwick pattern and back face has a Vee’d edge. T&G is 3/4″ thick and available in 5-1/8″, 6-7/8″ and 8-7/8″ face widths. Sold by the linear foot. Tier discounts available starting at 150 lft. This product is available in stock at our store and through TotalWoodStore online.Reversible T&G paneling in Knotty White Pine. Front face has a pickwick pattern and back face has a Vee’d edge. T&G is 3/4″ thick and available in 5-1/8″, 6-7/8″ and 8-7/8″ face widths. Sold by the linear foot. Tier discounts available starting at 150 lft. This product is available in stock at our store and through TotalWoodStore online.6-LITE White Pine Storm Door has 6 windows in the glass storm door. This door is made out of white pine. White Pine wood is more economical and lighter than Mahogany. White Pine doors are ideal if the door will be primed and painted instead of stained and there is an overhang over door to […] $ 498.00 – $ 695.00. More Info.2×6 YP FlamePro Fire-Retardant Lumber, S4S. Our 2×6 FlamePro Fire-Retardant Yellow Pine lumber is sold by the piece and comes in 8′, 10′, 12′ and 16′ lengths. Boards are S4S where both sides and edges are planed smooth. Actual board dimension is 1-1/2″ thick by 5-1/2″ wide. FlamePro lumber is chemically pressure-treated to reduce ...Mahogany, Honduras Hardwood S2S is stocked in 4/4, 5/4, 6/4, and 8/4 thicknesses. We can provide 1/2″ as a woodshop service with a 1-3 day turnaround. Skip surfaced on both faces, left rough on the edges, and sold by the board foot. The widths and lengths can vary by board. Our 4/4 board is dressed 13/16” to 7/8” thick and sold by the board foot. We also carry a nice grade of 1/4″ and 3/4″ Spanish Cedar plywood and have a Spanish cedar veneer with a 3M backer. Our S2S Spanish Cedar 1/2" thick is sold by the square foot and our 4/4 thick is sold by the board foot. Skip surfaced on both faces, left rough on the.Ground Contact. Ground contact pressure-treated wood is anything within 6 inches of the ground in contact with the ground. It has twice the level of chemical retention and protection than above-ground treated wood. It is best used for projects where wood is difficult to maintain or replace. Ground contact lumber is good for raised garden beds.Visit Capitol City Lumber Company or order your cedar wood online! ... - Near NC State Fairgrounds. Phone: 919.832.6492. Toll Free: 800.244.6492. Ipe Hardwood 4×4 S4S. The Ipe 4×4’s are surfaced on all four sides and square edged. Actual size is 3-1/2″ x 3-1/2″. Stocked in random sizes from 8′ to 16′ and sold by the linear foot. This product has limited quantities in stock. Please inquire with sales staff regarding availability. $ 37.89 $ 22.99. Top 10 Best Hardwood Lumber in Raleigh, NC - February 2024 - Yelp - Capitol City Lumber Company, Habitat Wake Restore - Raleigh, Lowe's Home Improvement, The …Clay Chimney Flue Liners. Our clay flue liner is a conduit for the inside of chimneys. Flue liners contain the combustion products, direct them to the outside atmosphere. The Liners also protect the chimney walls from heat and corrosion. All flue linings are square or rectangle in shape and come 24″ long.If you’re looking for an unbeatable selection of new and used vehicles, top-notch service, and a friendly staff, City Chevrolet in Charlotte, NC is the place to go. With a wide var...Unfinished Round Wooden Dowels. Unfinished Round Wooden Dowels in Hardwood. Available in poplar, red oak, hickory, maple, cherry, walnut, and mahogany. Also available in generic Hardwood for a more economical choice. Diameters range from 1/8″ to 2″ (actual 1-15/16″). Free Shipping through our Online Store on select sizes of Dowels.Conveniently located, with our full service lumberyard just off the Capital Circle NE Highway at Lonnbladh Rd, our experienced staff supplies the best ...GRADES OF PLYWOOD: The 1/4” thickness is graded A3. Front face is an A grade that is a smooth sanded and patch-free clear face. Back side is a 3 grade that will be of same or similar wood but may have filled knots, veneer joints or seams. This plywood is a stain grade on 1 side. The 1/2” and 3/4” thickness are graded B2.Paul Argoe Style 455 W. Pine Treated Screen Door is our most popular screen door. Made with clear white pine, this door is made Treated for extra protection against rot and decay. Door is 1-1/8″ thick and mortise and tenon construction for more durability. Door is a two panel screen door with 5 vertical rails […] $ 255.95 – $ 259.95.Get directions, reviews and information for Capitol City Lumber Company in Raleigh, NC. You can also find other Hardware Stores on MapQuestT1-11 Exterior Siding Panel with 8″ OC. The T1-11 style siding is made from rough texture panels and is 8” OC, on-center. Every 8”, there is a 1/2” channel. This panel is made with Radiata Pine Lumber. Available in 4’x8′ and 4’x9′ sizes in a 5/8″ thickness. This product can now be shipped to all 48 continental States through ...1×10 Cypress, Select S1S2E. Our 1×10 Cypress is sold by the linear foot. Kiln-dried and select D grade. There could be an occasional pin knots and other imperfections, but most boards are pretty clear. This material is S1S2E meaning one side is left rough, and the other side and edges are planed smooth. The rough side is often preferred as ...Bogotá D.C. is the capitol city of the South American country Columbia. D.C. stands for Distrito Capital or District Capital. During the colonial era, Bogotá was an official outpos...4216 Beryl Rd, Raleigh, NC 27606, USA: Phone: +1 919-832-6492: Site: capitolcitylumber.com: Rating: 3.7: Working: 8AM–4:30PM 8AM–4:30PM 8AM–4:30PM 8AM–4:30PM 8AM–4:30PM 9AM–2PM Closed: ... its like stepping back in time. Ive bought lumber and woodworking supplies from Capital City Lumber for a number of years and …The RB&B style siding is made from rough texture panels and is 12” OC, on-center. Every 12”, there is a 1-1/2” channel. This panel is made with Radiata Pine Lumber. Siding is 5/8″ thick and available in 4’x8′ and 4’x9′ sizes. This product can now be shipped to all 48 continental States through our TotalWoodStore.com. Minimum […]Sand (1) Monday - Friday. 8:00 AM - 4:30 PM. Saturday. 9:00 AM - 2:00 PM. Sunday. Closed. Sandblasting products produced by high purity industrial quartz and coal slag abrasive available in medium and fine sizes sold in 100lb bags in Raleigh, NC.The board will be straight-line ripped based on the dimensions provided by the customer. There is a 4 cut maximum per sheet. If you need more than 4 cuts per sheet, please submit layout request to woodshop in writing for a quote. $30 for 1 sheet. $54 for 2 sheets. $77 for 3 sheets. $96 for 4 sheets. $113 for 5 sheets. Poplar S4S hardwood is stocked in 2 thicknesses in widths from 4" to 12". Clean dressed on all four sides with square edges. Lengths can vary and sold by2×4 Yellow Pine Lumber, #1 Grade, S4S. Our 2×4 Yellow Pine lumber is sold in 93″ studs, 8′, 10′, 12′ and 16′ lengths in #1 Grade. This grade still allows for knots and wane, but will have fewer and smaller knots than the #2 grade. Boards are S4S where both sides and edges are planed smooth. Actual board dimension is a 1-1/2″ thick ...Capitol City Lumber Co. Address or Location: 1390 & 1420 Park Street, Parkville, Hartford; County: Hartford; Historic Designation. National Register District.6-LITE White Pine Storm Door. 6-LITE White Pine Storm Door has 6 windows in the glass storm door. This door is made out of white pine. White Pine wood is more economical and lighter than Mahogany. White Pine doors are ideal if the door will be primed and painted instead of stained and there is an overhang over door to protect door from weather. Store Hours. Monday - Friday. 8:00 AM - 4:30 PM. Saturday. 9:00 AM - 2:00 PM. Sunday. Closed. Providing interior and exterior flooring in Raleigh, NC such as vinyl flooring, laminate flooring, wood flooring, floor protection, pine, and PVC. Should have consistent thickness within species. Our 8/4 board is typically dressed 1-3/4” to 1-7/8” thick depending on species and sold by the board foot. Should have consistent thickness within species. Cherry Hardwood S2S is stocked in 4/4, 5/4, and 8/4 thicknesses. Skip surfaced on both faces, left rough on the edges, and sold by the ...Our 8/4 board is typically dressed 1-3/4” to 1-7/8” thick depending on species and sold by the board foot. Should have consistent thickness within species. Cherry Hardwood S2S is stocked in 4/4, 5/4, and 8/4 thicknesses. Skip surfaced on both faces, left rough on the edges, and sold by the board foot. The. Capitol City Lumber Company $$ Closed today 15 reviews (919) 832-6492 Website More Directions Advertisement 4216 Beryl Rd Raleigh, NC 27606 Closed today Hours Mon 8:00 AM - 4:30 PM Tue 8:00 AM - 4:30 PM Wed 8:00 AM - 4:30 PM Thu 8:00 AM - 4:30 PM Fri 8:00 AM - 4:30 PM Sat 9:00 AM - 2:00 PM (919) 832-6492 http://capitolcitylumber.com 1×10 Cypress, Select S1S2E. Our 1×10 Cypress is sold by the linear foot. Kiln-dried and select D grade. There could be an occasional pin knots and other imperfections, but most boards are pretty clear. This material is S1S2E meaning one side is left rough, and the other side and edges are planed smooth. The rough side is often preferred as ...Our 5/4 board is dressed 1” to 1-1/8” thick depending on species and sold by the board foot. Should have consistent thickness within species. Hard Maple S2S hardwood is stocked in 4/4 and 5/4 thicknesses. Skip surfaced on both faces, left rough on the edges, and sold by the board foot. The widths.Capitol City Lumber Company. Since 1947, Capitol City Lumber Company has been providing high-quality building materials and wood products to Raleigh and the Triangle …2×4 Clear KDAT Treated Lumber is the top of the line for handrails, outside furniture and all of your outside lumber projects. These 2×4 KDAT Culpeper lumber boards have a Clear grade which means one side is clear and the other side can be clear or have a small pin knot. KDAT boards are Kiln-dried after treatment, allowing the boards to be ...CDX Plywood. An exterior grade pine plywood with a CD grade, sheathing grade. This plywood is made with an exterior grade glue. A more economical choice this plywood allows for knots and other imperfections on both faces. Available in 1/2″, 5/8″ and 3/4″ thicknesses. This plywood is sold in full 4×8 sheets only.Plywood materials including fire retardant and marine plywood, closet liners, pegboard, slatwall, sheathing and tempered hardboard in Raleigh, NC. Capitol City Lumber …CDX Plywood. An exterior grade pine plywood with a CD grade, sheathing grade. This plywood is made with an exterior grade glue. A more economical choice this plywood allows for knots and other imperfections on both faces. Available in 1/2″, 5/8″ and 3/4″ thicknesses. This plywood is sold in full 4×8 sheets only.Our 2×6 Doug Fir is sold by the board. Kiln-dried and clear grade with just an occasional pin knot. This material is S4S where both sides and edges are planed smooth. Boards come in lengths 8′ through 20′ lengths. Actual board dimension is 1-1/2″ thick by 5-1/2″ wide. Quantity discount tier pricing is available on all orders over 50 ...2×6 Rough WR Cedar. 2×6 Rough WR Cedar is a #2 grade and sold by the linear foot. Western Red Cedar is often used for garden beds, landscape timbers and other rustic outdoor projects, this board is a #2 grade, left wet and rough. Actual board dimension estimates at 1-7/8″ thick by 5-7/8″ wide. Timbers are 8′ to 20′ in length.This exotic hardwood has a golden brown to dark brownish red color. This wood is ideal for decks and outside projects as it is highly resistant to decay and termites. Due to its beautiful color, it is often used interior as well as exterior. Ideal for decks, decking furniture, arbors, and accents. Price: $ 13.99 $ 8.89. Ipe Hardwood 4×4 S4S. The Ipe 4×4’s are surfaced on all four sides and square edged. Actual size is 3-1/2″ x 3-1/2″. Stocked in random sizes from 8′ to 16′ and sold by the linear foot. This product has limited quantities in stock. Please inquire with sales staff regarding availability. $ 37.89 $ 22.99.The board will be straight-line ripped based on the dimensions provided by the customer. There is a 4 cut maximum per sheet. If you need more than 4 cuts per sheet, please submit layout request to woodshop in writing for a quote. $30 for 1 sheet. $54 for 2 sheets. $77 for 3 sheets. $96 for 4 sheets. $113 for 5 sheets. Located in Raleigh, Capitol City Lumber supplies builders hardware such as electrical, exterior fasteners, shelving & shelf brackets & shims. ... - Near NC State ... Capitol City Lumber Company was incorporated in 1945, but due to World War II was not started until April 1, 1947.After World War II, our founder, James Anglin Nicholson started the company with one empty building, a two ton truck and a single load of plywood. ... 5199 Hillsborough St, Raleigh, NC 27606. 84 Lumber. 6301 Old Wake Forest Rd ...Retail Capitol City Lumber Company has been the triangle's one-stop resource for quality, service and dependability since 1947. Follow View all 10 employees About us Website...MDO, also known as Signboard, is an exterior-grade plywood with a high-quality fiber surface saturated with phenolic resin solids. The plywood below the fiber face is smooth, clear and free of patches, providing a smooth surface with minimal grain showing through. MDO plywood is water-proof and weather-resistant.Capitol City Lumber Co located at 4216 Beryl Rd, Raleigh, NC 27606 - reviews, ratings, hours, phone number, directions, and more.1×12 Knotty White Pine Lumber, S4S. Our 1×12 Knotty White Pine lumber is sold by the board in 8′ to 16′ lengths. Boards are a #2 grade and usually have knots allowing for a more rustic look. Boards are S4S where both sides and edges are planed smooth. Actual board dimension is 3/4″ thick by 11-1/4″ wide.- Near NC State Fairgrounds. Phone: 919.832.6492. ... Capitol City Lumber will use the information you provide on this form to be in touch with you and to provide ... Near NC State Fairgrounds. About. Contractors & Builders DIY Blog; Sales & Deals; Wood Services. Courtesy Rough Cuts; Local Lumber Delivery Areas; Special Orders; Request a Quote; ... Capitol City Lumber will use the information you provide on this form to be in touch with you and to provide updates and marketing.This split rail fencing is made of Western Red Cedar and holds up well to exterior elements without treatment. Design your fence with line post, end post and corner post options in the 3-hole split rail post. 3-Hole Cedar railings provides more durability to your fence. Promotional pricing for in-store and local sales only.CMT V-Goove Router Bit. TotalWoodStore is a division of Capitol City Lumber Company in Raleigh, North Carolina. Total Wood Store. Exotic and Domestic Hardwoods, Plywoods, Lattice, Wood Siding, Wood Shutters, Drapery Products and more. Discounts up to 15% OFF all orders. There are several places in the world with names that start with the letter X, many of which are cities in China. Among the most prominent is Xi’an, the capitol of Shaanxi province...See more reviews for this business. Top 10 Best Lumber Yards in Raleigh, NC - February 2024 - Yelp - American Woodyards, Capitol City Lumber Company, Burke Brothers Hardware, Builders FirstSource, Talbert Building Supply, Decks By All Means, Oak City Customs, Town & Country Hardware, Hudson's Hardware.If you’re a nature enthusiast or simply seeking a break from the bustling city life, Raleigh, North Carolina, offers an abundance of outdoor destinations just a short drive away. F...

Store Hours. Monday - Friday. 8:00 AM - 4:30 PM. Saturday. 9:00 AM - 2:00 PM. Sunday. Closed. House siding and roofing materials including siding corners, interior beadboard, lap siding, panel siding, shingles and soffit in Raleigh, NC.. A ok lyrics

capitol city lumber nc

This split rail fencing is made of Western Red Cedar and holds up well to exterior elements without treatment. Design your fence with line post, end post and corner post options in the 3-hole split rail post. 3-Hole Cedar railings provides more durability to your fence. Promotional pricing for in-store and local sales only.Our CEDAR DECKING is made with Western Red Cedar, a softwood known for its stability, straight grain and durability in exterior climates. This lumber is naturally resistant to rot and decay without any treatment. Western Red Cedar is normally reddish-brown in color. This wood ages to a natural silver-gray color when left unfinished outdoors.4×4 Yellow Pine Timbers, #1 Grade, S4S. Our 4×4 #1 grade Yellow Pine timbers are sold in 8′, 10′ and 12′ lengths. A more economical option, the #1 grade still allows for knots and wane, but will have fewer and smaller knots than the #2 grade. Boards are S4S where both sides and edges are planed smooth. Actual board dimension is a 3-1/2 ...38 Faves for DIB/Capitol City Lumber Company from neighbors in Raleigh, NC. Capitol City Lumber yard is a one-stop resource for hardwoods, lumber, plywood, and other …Okoume Marine Plywood. Marine grade unfinished Okoume plywood or Aquatek Meranti Marine plywood. Marine grade plywood has solid plys with no voids and a pholic exterior glue. This plywood is not treated. Full 4×8 sheets are available in stock at our location in 1/2″ and 3/4″. We also have a limited selection of partial redi-cut 2’x4 ... 4×10 Doug Fir S4S timber sold by the board. These boards are often used for rustic fireplace mantels and mantel brackets. Left wet and construction grade. This material is S4S meaning all four sides are planed smooth. Boards come in 6′, 8′ and 12′ lengths. Actual board dimension is 3-1/2″ thick by 9-1/4″ wide.Wooden Cabinetry. The versatility and ease of access to birch lumber make it a popular choice for cabinetry. For one, birch is especially easy to cut and sand and takes stains rather easily. This means there is plenty of room for creativity and customization when you use birch. Additionally, birch is a much more economical choice for kitchen ...T&G Pickwick Knotty White Pine Paneling. Reversible T&G paneling in Knotty White Pine. Front face has a pickwick pattern and back face has a Vee’d edge. T&G is 3/4″ thick and available in 5-1/8″, 6-7/8″ and 8-7/8″ face widths. Sold by the linear foot. Tier discounts available starting at 150 lft.TWP 100 Series available in 8 UV absorbing colors; Cedartone Natural, Redwood, Dark Oak, Cape Cod Gray, Prairie Gray, Honeytone, Rustic, and Pecan. TWP 100 Series is also available in clear. Clear will allow wood to gray naturally. Can be used on siding, decks, fences, and roofing. Color.4×4 Yellow Pine Timbers, #1 Grade, S4S. Our 4×4 #1 grade Yellow Pine timbers are sold in 8′, 10′ and 12′ lengths. A more economical option, the #1 grade still allows for knots and wane, but will have fewer and smaller knots than the #2 grade. Boards are S4S where both sides and edges are planed smooth. Actual board dimension is a 3-1/2 ...A Division of Capitol City Lumber 4216 Beryl Road Raleigh, NC 27606 United States of America Call us at 800-244-6492 Subscribe to our newsletter. Get the latest updates on new products and upcoming sales. Email AddressOur 5/4 x 4 Cypress is sold by the linear foot. Kiln-dried and select D grade. There could be an occasional pin knots and other imperfections, but most boards are pretty clear. This material is S1S2E meaning one side is left rough, and the other side and edges are planed smooth. The rough side is […] $ 4.59 $ 3.29.SELECT KDAT Re-dried YPT Culpeper EE Decking 5/4×6 measures 5/4×6 (actual 1” x 5-1/2”) and comes in 8’, 10’, 12’, 14′, 16’ and 20′ lengths. Select grade and re-dried after treatment. For Decking grading through Culpeper, the Select grade is a step up from Premium decking with clearer boards. May have occasional small knots and ...2×6 YP FlamePro Fire-Retardant Lumber, S4S. Our 2×6 FlamePro Fire-Retardant Yellow Pine lumber is sold by the piece and comes in 8′, 10′, 12′ and 16′ lengths. Boards are S4S where both sides and edges are planed smooth. Actual board dimension is 1-1/2″ thick by 5-1/2″ wide. FlamePro lumber is chemically pressure-treated to reduce ...Accoya Lumber. Accoya Lumber is Stable and Sustainable with a 25/50 year life. Stocked rough in 4/4 and 8/4 thickness and sold by the board foot. Please inquire with sales counter on widths and lengths presently available in stock. This wood is kiln-dried and ready to be coated. Additional thickness and sizes available through Special Order.Mahogany, Honduras Hardwood S2S is stocked in 4/4, 5/4, 6/4, and 8/4 thicknesses. We can provide 1/2″ as a woodshop service with a 1-3 day turnaround. Skip surfaced on both faces, left rough on the edges, and sold by the board foot. The widths and lengths can vary by …Capitol City Lumber Company. Since 1947, Capitol City Lumber Company has been providing high-quality building materials and wood products to Raleigh and the Triangle ….

Popular Topics